America's Original Industrial Directory Since 1893

Directions

Kimre Inc.

Address: 744 SW 1st Street
Homestead, FL
33030
Business Activity: Manufacturer / Distributor / Service / Exporter
Phone: 305-233-4249
Fax: 305-233-8687
Website:

Get a Free Quote from Kimre Inc.

About Kimre Inc.

Kimre, Inc. has provided air pollution control equipment since 1973. Kimre, Inc. manufacturers customized mist eliminators, scrubber & tower packing, coalescers & custom made materials for other filtration applications, drift eliminators and supports for materials beds. Kimre, Inc. provides engineering & consulting services for the design of mist eliminators, scrubbing equipment & other mass transfer operations using this equipment. We offer the following products: B-GON® Mist Eliminators KON-TANE® Scrubber & Tower Packing Kimre™ Fiber Bed Coalescing Filters AEROSEP® Multi-Stage Aerosol Separation Systems for low pressure drop particulate removal down to 0.2 microns, SXF™ Cross Flow Scrubber DRIFTOR® Drift Eliminators LIQUI-NOMIX® Liquid/Liquid Coalescer BATTEN BAR™ and PANTS HANGER™ Media support and handling systems B-GON®, AEROSEP®, KON-TANE®, DRIFTOR® and LIQUI-NOMIX® are registered trademarks of KIMRE, Inc., USA. KIMRE, PANTS HANGER™, BATTEN BAR™, SXF™ and GLS are trademarks or service marks of KIMRE, INC., USA Designers & Fabricators of Specialty Scrubbers using KIMRE SXF™ and AEROSEP® Technologies.

Get a Free Quote from Kimre Inc.

Additional Info for Kimre Inc.

Featured Products offered by Kimre Inc.

  • ABSORBERS
    Kimre offers custom designed mist eliminators for collection of droplets and particulates above 0.8 microns in diameter. Several standard pad designs are available for routine installations, but thousands of pad combinations are available for unique situations.
  • AIR CLEANING SYSTEMS
    Kimre offers the AEROSEP® Multi-Stage Aerosol Separation System to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing.
  • AIR POLLUTION CONSULTANTS
    For more than 40 years, Kimre product engineers and application specialists have been solving process gas stream and emission problems in plants around the world. This experience results in a superior understanding of gas and vapor stream separation and mass and heat transfer. We have a special insight into the effects of these dynamics on system energy consumption and separation effectiveness.
  • AIR POLLUTION CONTROL EQUIPMENT
    Air Pollution Control equipment with top mounted motors and fans. Air Pollution Control Systems pulls the contaminated air through the lower side opening and releases clean are through the upper side outlet. Air Pollution Control Systems are weatherproof for outdoors use and are available with one or two drum storage.
  • AIR POLLUTION CONTROL EQUIPMENT REPAIR & REBUILDING
    Kimre engineers routinely analyze gas-stream applications and help customers determine the optimal, cost-effective separation solution. Based on consideration of gas-stream parameters - such as size and nature of mist or solid particles to be removed, temperature and chemical compatibility of materials, and open area necessary for effective liquid handling - Kimre designs and recommends custom solutions which minimize pressure drop and system energy costs while increasing throughput.
  • AIR POLLUTION CONTROL SYSTEMS
    Air Pollution Control Systems equipped with top mounted motors and fans. Air Pollution Control Systems pulls the contaminated air through the lower side opening and releases clean are through the upper side outlet. Air Pollution Control Systems are weatherproof for outdoors use and are available with one or two drum storage.
  • AIR PURIFICATION EQUIPMENT
    Kimre offers the AEROSEP® Multi-Stage Aerosol Separation System to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through gas conditioning stages and particle growth stage within the AEROSEP® system before being collected by a final entrainment separator stage.
  • AIR PURIFICATION SYSTEMS
    Air Purification Systems equipped with top mounted motors and fans. Air Purification Systems pulls the contaminated air through the lower side opening and releases clean are through the upper side outlet. Air Purification Systems is weatherproof for outdoors use and are available with one or two drum storage.
  • COALESCERS
    We offer the AEROSEP Multi-stage Aerosol separation system to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through gas conditioning stages and particle growth stage within the AEROSEP system before Coalescing the 1 micron particles to approximately 10-12 microns take place. After the process of Coalescing, final removal of the re-entrained droplets take place
  • COALESCERS: Liquid
    The self-supporting LIQUI-NOMIX® structure works well in both clean and dirty services because of the large number of fibers perpendicular to the flow, the high void space, and the variety of monofilament diameters and materials of constructions available.The composite feature of the LIQUI-NOMIX® material allows for long term operation, low maintenance, and reusability.
  • COLLECTORS: Mist
    Mist Collectors available in a wide range of materials and styles for every application. Mist Collectors can operate at the highest gas velocities based on the largest fiber diameters. Mist Collectors collect any material: 99+% @ 1µm. Mist Collectors are reusable and easy to clean with extended service life in harsh environments.
  • DEMISTERS
    The various styles and materials manufactured by Kimre can be combined into single pads to meet your systme's requirements. Grid supports and technical support are also available.
  • DUST COLLECTORS: Wet Type
    Wet Type Dust Collectors equipped with top mounted motors and fans. Wet Type Dust Collectors pulls the contaminated air through the lower side opening and releases clean are through the upper side outlet. Wet Type Dust Collectors are weatherproof for outdoors use and are available with one or two drum storage.
  • ELIMINATORS
    Eliminators available in a wide range of materials and styles for every application. Eliminators can operate at the highest gas velocities based on the largest fiber diameters. Eliminators collect any material: 99+% @ 1µm. Eliminators are reusable and easy to clean with extended service life in harsh environments.
  • ELIMINATORS: Drift
    Drift Eliminators available in a wide range of materials and styles for every application. Drift Eliminators can operate at the highest gas velocities based on the largest fiber diameters. Drift Eliminators collect any material: 99+% @ 1µm. Drift Eliminators are reusable and easy to clean with extended service life in harsh environments.
  • ELIMINATORS: Mist
    Mist Eliminators available in a wide range of materials and styles for every application. Mist Eliminators can operate at the highest gas velocities based on the largest fiber diameters. Mist Eliminators collect any material: 99+% @ 1µm. Mist Eliminators is reusable and easy to clean with extended service life in harsh environments.
  • Filter Elements: Fume
    We offer custom designed mist eliminators for collection of droplets and particulates above 0.8 microns in diameter. We developed a structured mesh to combat the weaknesses of the wire mesh already on the market.
  • Filter Elements: Sub Micron
    We offer the AEROSEP Multi-stage aerosol separation system to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through gas conditioning stages and particle growth stage within the AEROSEP system before being collected by a final entrainment separator stage.
  • Filters: Fiber Bed
    We design and fabricate fiber bed coalescing filters and can be used in a wide range of applications in different industries. These are used to reduce and eliminate liquid mist emissions and are available in standard or custom-designed configurations that can easily fit new or existing systems in the field. Fiber bed filter mist collectors are used to trap, collect and remove liquids and soluble particulate suspended in a gas stream. They are also to collect insoluble solids.
  • FILTRATION SYSTEMS: Oil & Water Separator
    Oil and Water Separator Filtration Systems available in either horizontal or vertical vessels designed to continuously settle, coalesce and withdraw liquids. Oil and Water Separator Filtration Systems designed with cleanable and reusable cartridges. Oil and Water Separator Filtration Systems outlet limits <2ppm. Oil and Water Separator Filtration Systems most commonly use materials in range of -mil to 37-mil (0.2 – 0.9 mm) diameter and 94-97% void space.
  • LIQUID-LIQUID SEPARATORS
    The process to separate liquid-liquid mixtures is to first settle and coalesce the mixture after which they can be separated. Cyclones and centrifuges have also been used for separating liquid-liquid mixtures by enhancing the settling rate and reducing the separation time.
  • MIST ELIMINATORS: Replacement Elements
    Mist Eliminator Replacement Elements available in a wide range of materials and styles for every application. Mist Eliminator Replacement Elements can operate at the highest gas velocities based on the largest fiber diameters. Mist Eliminator Replacement Elements collect any material: 99+% @ 1µm. Mist Eliminator Replacement Elements are reusable and easy to clean with extended service life in harsh environments.
  • MIST EXTRACTORS
    Mist Extractors available in a wide range of materials and styles for every application. Mist Extractors can operate at the highest gas velocities based on the largest fiber diameters. Mist Extractors collect any material: 99+% @ 1µm. Mist Extractors are reusable and easy to clean with extended service life in harsh environments.
  • OIL MIST COLLECTORS
    Oil Mist Collectors available in a wide range of materials and styles for every application. Oil Mist Collectors can operate at the highest gas velocities based on the largest fiber diameters. Oil Mist Collectors collect any material: 99+% @ 1µm. Oil Mist Collectors are reusable and easy to clean with extended service life in harsh environments.
  • PACKING: Chemical
    KON-TANE® packing is a structured, interlaced monofilament material. It is designed to facilitate breakup of the liquid phase, creating maximum surface area for mass transfer with the vapor phase. KON-TANE® packing produces low pressure drop, prevents liquid holdup on and within the packing and curtails excessive energy use.
  • POLLUTION CONTROL EQUIPMENT
    Pollution Control Equipment equipped with top mounted motors and fans. Pollution Control Equipment pulls the contaminated air through the lower side opening and releases clean are through the upper side outlet. Pollution Control Equipment is weatherproof for outdoors use and are available with one or two drum storage.
  • POLLUTION CONTROL SYSTEMS
    Pollution Control Systems equipped with top mounted motors and fans. Pollution Control Systems pulls the contaminated air through the lower side opening and releases clean are through the upper side outlet. Pollution Control Systems are weatherproof for outdoors use and are available with one or two drum storage.
  • SCRUBBERS
    Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Scrubbers remove incoming particles larger than 3 microns in diameter. Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Air
    Air Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Air Scrubbers remove incoming particles larger than 3 microns in diameter. Air Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Air Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Dust
    Dust Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Dust Scrubbers remove incoming particles larger than 3 microns in diameter. Dust Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Dust Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Environmental
    Environmental Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Environmental Scrubbers remove incoming particles larger than 3 microns in diameter. Environmental Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Environmental Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Exhaust
    Exhaust Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Exhaust Scrubbers remove incoming particles larger than 3 microns in diameter. Exhaust Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Exhaust Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Fume
    Fume Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Fume Scrubbers remove incoming particles larger than 3 microns in diameter. Fume Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Fume Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Gas
    Gas Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Gas Scrubbers remove incoming particles larger than 3 microns in diameter. Gas Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Gas Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Horizontal, Dry & Wet
    Dry and Wet, Horizontal Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Dry and Wet, Horizontal Scrubbers remove incoming particles larger than 3 microns in diameter. Dry and Wet, Horizontal Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Dry and Wet, Horizontal Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Nox
    Nox Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Nox Scrubbers remove incoming particles larger than 3 microns in diameter. Nox Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Nox Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Packed Bed
    Packed Bed Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Packed Bed Scrubbers remove incoming particles larger than 3 microns in diameter. Packed Bed Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Packed Bed Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Stack
    Stack Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Stack Scrubbers remove incoming particles larger than 3 microns in diameter. Stack Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Stack Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SCRUBBERS: Wet
    Wet Scrubbers are liquid or solid particle ranging in diameter from 10 to 20µm. Wet Scrubbers remove incoming particles larger than 3 microns in diameter. Wet Scrubbers use nucleated condensation or flux force to approximately one micron of incoming particles. Wet Scrubbers then coalesce the micron particles to approximately 10-12 microns and remove the re-entrained droplets.
  • SEPARATORS
    Separators available in either horizontal or vertical vessels designed to continuously settle, coalesce and withdraw liquids. Separators designed with cleanable and reusable cartridges. Separators outlet limits <2ppm. Separators most commonly use materials in range of -mil to 37-mil (0.2 – 0.9 mm) diameter and 94-97% void space.
  • Separators: Gas-Liquid
    Separating liquids from gases is called Mist elimination or demisting. The wire mist eliminators also known as knitted mesh mist eliminators, collect droplets by the inertial impaction and interception mechanisms of collection.
  • SEPARATORS: Liquid-solid
    Liquid-liquid mixtures must be settled and coalesced before they can be separated. Gravity settlers or decanters can be either horizontal or vertical vessels designed to continuously settle, coalesce, and withdraw settled liquids.
  • SEPARATORS: Mist
    The mechanical separation of liquids from gases is called Mist elimination or demisting. The wire mist eliminators collect droplets by the inertial impaction and interception mechanisms of collection. The wire mesh separators are commonly used to collect droplets above 5 microns in diameter.
  • SEPARATORS: Oil From Liquid
    Liquid-liquid mixtures must be settled and coalesced before they can be separated. Cyclones and centrifuges have also been used for separating liquid/liquid mixtures by enhancing the settling rate and reducing the separation time.
  • SEPARATORS: Oil From Water
    Oil From Water Separators available in either horizontal or vertical vessels designed to continuously settle, coalesce and withdraw liquids. Oil From Water Separators designed with cleanable and reusable cartridges. Oil From Water Separators outlet limits <2ppm. Separators most commonly use materials in range of -mil to 37-mil (0.2 – 0.9 mm) diameter and 94-97% void space.
  • SEPARATORS: Oil, From Gas Or Air
    Oil From Gas, or Air Separators available in either horizontal or vertical vessels designed to continuously settle, coalesce and withdraw liquids. Oil From Gas, or Air Separators designed with cleanable and reusable cartridges. Oil From Gas, or Air Separators outlet limits <2ppm. Oil From Gas, or Air Separators most commonly use materials in range of -mil to 37-mil (0.2 – 0.9 mm) diameter and 94-97% void space.
  • SEPARATORS: Oil, From Water
    Oil, From Water Separators available in either horizontal or vertical vessels designed to continuously settle, coalesce and withdraw liquids. Oil, From Water Separators designed with cleanable and reusable cartridges. Oil, From Water Separators outlet limits <2ppm. Oil, From Water Separators most commonly use materials in range of -mil to 37-mil (0.2 – 0.9 mm) diameter and 94-97% void space.
  • SUB MICRON PARTICLE COLLECTION
    AEROSEP Multi-stage Aerosol Separation System is used to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols even as small as 0.2 microns in diameter pass through gas conditioning stages and particle growth stage within the AEROSEP system before being collected by a final entrainment separator stage.

Other Products offered by Kimre Inc.

Powered by MacRAE'S
 
Browse by Company:   A-B  C-E  F-J  K-O  P-S  T-Z                    Browse by Heading:   A-C   D-K   L-R   S-Z
  • © 2017 MacRAE'S. All rights reserved
  • Like us -
  • |
  • Join us -
  • |
  • Follow us -